Saltar al contenido principal

Insignia Flex 8 Battery Replacement

Qué necesitas

  1. Insignia Flex 8 Battery Replacement, Battery: paso 1, imagen 1 de 1
    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

  2. Insignia Flex 8 Battery Replacement: paso 2, imagen 1 de 2 Insignia Flex 8 Battery Replacement: paso 2, imagen 2 de 2
    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

  3. Insignia Flex 8 Battery Replacement: paso 3, imagen 1 de 1
    • Peel back the tape from battery and case.

  4. Insignia Flex 8 Battery Replacement: paso 4, imagen 1 de 1
    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

  5. Insignia Flex 8 Battery Replacement: paso 5, imagen 1 de 1
    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Tyler Tyrrell

Miembro Desde 03/11/15

890 Reputación

4 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 9,096