Repara tus cosas Comunidad Tienda

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

Introducción

Rubber gaskets may wear out over time, preventing the lid from closing/opening properly. This guide will show you how to replace the rubber gasket.

  1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: paso 1, imagen 1 de 1

    • Remove lid and place upside down on a flat surface.

    Editar

  3. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: paso 2, imagen 1 de 2 Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: paso 2, imagen 2 de 2

    • Grab the edge of the clear rubber gasket and slowly peel it off the lid.

    • Continue peeling off the gasket until it is completely detached from the lid.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Savannah Webb

Miembro Desde 01/18/18

657 Reputación

5 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team S12-G3, Banghart Winter 2018 Miembro de Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 Miembros

5 Guías creadas

3 comentarios

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - Contestar

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - Contestar

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 1,192