Repara tus cosas Comunidad Tienda

Insignia 24" LED Roku TV Screen Replacement

Escrito Por: Hannah Berenjfoorosh (y otros 8 participantes)
  • Comentarios: 2
  • Favoritos: 1
  • Terminaciones: 1

Dificultad

Moderado

Pasos

13

Tiempo Requerido

20 minutos

Secciones

2

Banderas

1

Needs Better Images

Necesita mejores imágenes

Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!

Introducción

This guide will take you through the process of replacing a broken or unusable screen on the Insignia 24" LED Roku TV.

Herramientas

Partes

No se especificaron partes.

  1. Place the TV face down so you have access to the back.

    • Place the TV face down so you have access to the back.

    Editar

  2. Rest the TV on its top edge so you have access to the base. Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base. Remove the base from the frame.

    • Rest the TV on its top edge so you have access to the base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

    Editar

  3. Lay the TV face down. Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    • Lay the TV face down.

    • Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    Editar

  4. Stand the TV on its top edge.

    • Stand the TV on its top edge.

    • Gently pry apart the front and back of the TV.

    • The two halves should pull apart easily since there are no longer any screws holding it together.

    Editar

  5. There are wires still connecting the two halves. Remove all the pieces of tape to detach the wires from both sides. Remove all the pieces of tape to detach the wires from both sides.

    • There are wires still connecting the two halves.

    • Remove all the pieces of tape to detach the wires from both sides.

    Editar

  7. Completely pry apart your TV.

    • Completely pry apart your TV.

    • You should have a clear view of the inside on both sides.

    Editar

  8. Remove the tape that is holding the silver rectangular piece from the house.

    • Remove the tape that is holding the silver rectangular piece from the house.

    Editar

  9. Using the Phillips 00 Screwdriver, remove the screws that are also holding the silver rectangular piece to the house. Using the Phillips 00 Screwdriver, remove the screws that are also holding the silver rectangular piece to the house.

    • Using the Phillips 00 Screwdriver, remove the screws that are also holding the silver rectangular piece to the house.

    Editar

  10. Remove the plastic casing from the glass screen. Then carefully remove metal backing from glass screen and separate the layer of plastic from the glass screen. Then carefully remove metal backing from glass screen and separate the layer of plastic from the glass screen.

    • Remove the plastic casing from the glass screen.

    • Then carefully remove metal backing from glass screen and separate the layer of plastic from the glass screen.

    Editar

  11. Separate plastic screen protector layers from both the backing and glass screen. The second picture provides image of what the plastic screen protectors look like.

    • Separate plastic screen protector layers from both the backing and glass screen.

    • The second picture provides image of what the plastic screen protectors look like.

    Editar

  12. Find the display board and unplug the white ribbon cord from the board. Squeeze both sides of the plug to release the cord. Squeeze both sides of the plug to release the cord.

    • Find the display board and unplug the white ribbon cord from the board.

    • Squeeze both sides of the plug to release the cord.

    Editar

  13. Using same screwdriver, unscrew the screws that are on the green display board. Separate the green display board from its metal backing. Separate the green display board from its metal backing.

    • Using same screwdriver, unscrew the screws that are on the green display board.

    • Separate the green display board from its metal backing.

    Editar

  14. All cables connecting screen to frame are now detached.

    • All cables connecting screen to frame are now detached.

    • Now pull apart and separate the screen.

    Editar
Conclusión

To reassemble your TV, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 8 otros colaboradores

Hannah Berenjfoorosh

Miembro Desde 22/01/18

503 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team S16-G2, Banghart Winter 2018 Miembro de Cal Poly, Team S16-G2, Banghart Winter 2018

CPSU-BANGHART-W18S16G2

4 Miembros

6 Guías creadas

Un Comentario

How do I find a replacement screen? NS-32DF310NA19

Lakeisha - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 17

Ultimos 30 días: 95

Todo El Tiempo: 3,437