Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Ensure that the hand held monitor is off and unplugged prior to starting this guide. No tools are required for replacing the battery.

  1. Press on the blue clip on the back and slide it down. In the second picture there is a slight gap at the top of the blue clip.
    • Press on the blue clip on the back and slide it down.

    • In the second picture there is a slight gap at the top of the blue clip.

  2. Pull the blue clip away from the body of the hand held monitor.
    • Pull the blue clip away from the body of the hand held monitor.

  3. Slide the rear white panel off as shown.
    • Slide the rear white panel off as shown.

  4. Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor. Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor.
    • Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Charles Neal

Miembro Desde 31/08/15

669 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 6-2, Remmell Fall 2015 Miembro de USF Tampa, Team 6-2, Remmell Fall 2015

USFT-REMMELL-F15S6G2

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 8

Todo El Tiempo: 1,346