Repara tus cosas Comunidad Tienda

IdeaPad Yoga 13 Charging Port Replacement

Introducción

Simple guide to disassembling the keyboard down to the motherboard. In detail explains how to successfully replace the charging port.

Qué necesitas

  1. IdeaPad Yoga 13 Charging Port Replacement, Charging Port: paso 1, imagen 1 de 1

    • Remove all ten screws using the T4 Torx screwdriver.

    • Remove the back cover from the device.

    Editar

  2. IdeaPad Yoga 13 Charging Port Replacement: paso 2, imagen 1 de 2 IdeaPad Yoga 13 Charging Port Replacement: paso 2, imagen 2 de 2

    • Use the blue opening tool to further separate the keyboard bezel.

    • Carefully apply pressure to the keyboard. It should easily pop out.

    Editar

  4. IdeaPad Yoga 13 Charging Port Replacement: paso 3, imagen 1 de 1

    • To remove the keyboard bezel, unscrew and remove the five screws using the Phillips #0 screwdriver.

    Editar

  5. IdeaPad Yoga 13 Charging Port Replacement: paso 4, imagen 1 de 2 IdeaPad Yoga 13 Charging Port Replacement: paso 4, imagen 2 de 2

    • Unplug the connections from the motherboard.

    • There is a different connection for the mouse and keyboard.

    Editar

  6. IdeaPad Yoga 13 Charging Port Replacement: paso 5, imagen 1 de 1

    • Remove the outer bezel to reveal the entire internal layout of the computer.

    • Motherboard and other internal components are now exposed.

    Editar

  7. IdeaPad Yoga 13 Charging Port Replacement: paso 6, imagen 1 de 3 IdeaPad Yoga 13 Charging Port Replacement: paso 6, imagen 2 de 3 IdeaPad Yoga 13 Charging Port Replacement: paso 6, imagen 3 de 3

    • Remove charging port by prying out the yellow port from the computer chassis.

    • Note the route of the cable for re-installation of the replacement.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Kaitlyn Johnson

Miembro Desde 04/01/19

157 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

IUPUI, Team S1-G2, Harley Spring 2019 Miembro de IUPUI, Team S1-G2, Harley Spring 2019

IUPUI-HARLEY-S19S1G2

3 Miembros

2 Guías creadas

Un comentario

do you have the schematic of the board?

Jorge Herrera - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 12

Todo El Tiempo: 1,603