IBM ThinkPad T42 Wi-Fi Card Replacement

Introducción

A IMB ThinkPad T42 Wi-Fi card allows the device to connect to a wireless network. If your Wi-Fi card is broken or needs to be replaced this guide will show you how.

Qué necesitas

Paso 1 Bottom cover

IBM ThinkPad T42 Wi-Fi Card Replacement, Bottom cover: paso 1, imagen 1 de 1

Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

Editar

Paso 2 Rear screws

IBM ThinkPad T42 Wi-Fi Card Replacement, Rear screws: paso 2, imagen 1 de 1

Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

Editar

leave these four screws alone. No need to remove them.

fredwb - 8 de mar. de 2014 Contestar

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - 19 de sep. de 2015 Contestar

Paso 3 Keyboard and Trackpad

IBM ThinkPad T42 Wi-Fi Card Replacement, Keyboard and Trackpad: paso 3, imagen 1 de 1

Flip the laptop over and open the screen to access the keyboard and trackpad.
The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
The bezel and keyboard will be loose, be careful.

Editar

Paso 4

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Editar