Saltar al contenido principal

Introducción

The Mini-PCI port can be accessed easily after removing the rear cover

Partes

No se especificaron partes.

  1. Unscrew the 20 Phillips screws on the underside of the T42.
    • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

  2. Unscrew the 2 Phillips screws on both sides of the T42's rear.
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

  3. Flip the laptop over and open the screen.
    • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

  4. Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together. Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

  5. Remove the screw affixing the bracket down.
    • Remove the screw affixing the bracket down.

  6. Lift the bracket up and out.
    • Lift the bracket up and out.

  7. Carefully disconnect it from the motherboard and pull it out of the device.
    • Carefully disconnect it from the motherboard and pull it out of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 29-76, Johann Spring 2010 Miembro de Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Miembros

30 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 4,062