Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

IBM ThinkPad T42 Keyboard and Trackpad Replacement

Qué necesitas

  1. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Bottom cover: paso 1, imagen 1 de 1
    • Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

  2. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Rear screws: paso 2, imagen 1 de 1
    • Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

  3. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Keyboard/Trackpad Removal: paso 3, imagen 1 de 1
    • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

  4. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Disconnecting Ribbon Cables: paso 4, imagen 1 de 2 IBM ThinkPad T42 Keyboard and Trackpad Replacement, Disconnecting Ribbon Cables: paso 4, imagen 2 de 2
    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Austin Kidd

Miembro Desde 04/21/10

299 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 29-76, Johann Spring 2010 Miembro de Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Miembros

35 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 29

Todo El Tiempo: 10,001