Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

IBM ThinkPad T42 Hard Drive Replacement

Qué necesitas

  1. IBM ThinkPad T42 Hard Drive Replacement, Battery Clips: paso 1, imagen 1 de 1
    • Flip the laptop over so the underside is facing you, then, release the 2 clips holding the battery on.

    • Make sure the laptop is off when you do this, sudden power outages can cause data corruption.

  2. IBM ThinkPad T42 Hard Drive Replacement, Removing the Battery: paso 2, imagen 1 de 1
    • Carefully grab the battery, then pull it straight out, not at an angle.

  3. IBM ThinkPad T42 Hard Drive Replacement, Hard Drive Screw: paso 3, imagen 1 de 1
    • Unscrew the single screw holding the drive cage in place.

  4. IBM ThinkPad T42 Hard Drive Replacement, Sliding Drive Out: paso 4, imagen 1 de 1
    • Pull the hard drive out with of its bay the help of pictured ridges. Carefully remove it.

    • It might help to open the display slightly.

  5. IBM ThinkPad T42 Hard Drive Replacement, Removal of HDD: paso 5, imagen 1 de 1
    • Pull the Hard Drive out and proceed with replacement.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Austin Kidd

Miembro Desde 04/21/10

317 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 29-76, Johann Spring 2010 Miembro de Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Miembros

35 Guías creadas

Un comentario

Excelente guía. Gracias

Luis Aguilar - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 20

Ultimos 30 días: 89

Todo El Tiempo: 20,643