Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the screen and turn the closed laptop over.
-
Remove all 17 screws on the bottom of the computer.
-
The yellow marker at the rear denotes the UltraBay device retaining screw. This screw is optional as the UltraBay mechanism will hold the drive or battery in place anyway. The yellow marker at the front denotes the hard disk caddy retaining screw.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the extra RAM cover, by lifting where the screw was and pulling out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the laptop right side up and open the screen.
-
Lift the keyboard, using a spudger at the seam between the keyboard and trackpad.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the keyboard’s ribbon cable, by lifting up the edges of the plug.
-
Remove the keyboard.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the laptop and turn it over.
-
Remove the five plastic stickers covering the screws on the front edge of the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the five screws that were hidden by the stickers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the computer right side up and open the screen.
-
Lift the trackpad assembly by placing hands on both edges and then pull towards you till it is free of the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the trackpad’s ribbon cable by pulling on the white plastic tab.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the speakers out by starting with the left end and then unsnake the wires.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.