Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

IBM ThinkPad T30 Hard Drive Replacement

Introducción

Use this guide to replace your hard drive.

Qué necesitas

  1. IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 1 de 3 IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 2 de 3 IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 3 de 3

    • Make sure the ThinkPad is off and the power supply is unplugged.

    • Flip the ThinkPad upside down with the bottom facing you.

    • Slide the latch to the right into the unlock position.

    • While holding the latch in the unlock position, lift the battery out with your other hand.

    Traducir

  2. IBM ThinkPad T30 Hard Drive Replacement, Hard Drive: paso 2, imagen 1 de 1

    • Flip to the back of the Thinkpad and focus on the screw in the bottom left corner of the Thinkpad.

    • Unscrew the 11mm Phillips #0 screw with a Phillips #0 screwdriver.

    Traducir

  4. IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 1 de 3 IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 2 de 3 IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 3 de 3

    • Flip the Thinkpad on its side to get a better view of the hard drive.

    • Use your thumbs to push on the lower edge of the hard drive cover to detach the hard drive from the Thinkpad.

    • Once you have detached the hard drive from the Thinkpad, slide the hard drive out of the device.

    Traducir

  5. IBM ThinkPad T30 Hard Drive Replacement: paso 4, imagen 1 de 2 IBM ThinkPad T30 Hard Drive Replacement: paso 4, imagen 2 de 2

    • Use the plastic opening tool to remove the black plastic cover from the main body of the hard drive. Pry on the ends of the plastic cover to detach it from the hard drive.

    • Once the black plastic has been detached, the plastic will then slide off the body of the hard drive.

    Traducir

  6. IBM ThinkPad T30 Hard Drive Replacement: paso 5, imagen 1 de 2 IBM ThinkPad T30 Hard Drive Replacement: paso 5, imagen 2 de 2

    • Locate and remove the four 2.8mm Phillips #0 screws on the mounting bracket.

    • Pull the mounting bracket off of the hard drive.

    • It may be easier to remove the mounting bracket by rotating it off of the hard drive as if it is on a hinge.

    Traducir
Conclusión

To reassemble your device with a new hard drive, follow these instructions in reverse order with a new hard drive replacing the old one.

11 personas más completaron esta guía.

Autor

con 13 otros colaboradores

Allie Knauer

Miembro Desde 10/05/12

90 Reputación

3 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 3-20, Amido Fall 2012 Miembro de Cal Poly, Team 3-20, Amido Fall 2012

CPSU-AMIDO-F12S3G20

3 Miembros

16 Guías creadas

Un comentario

good description and photos..thanks :]

David - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 56

Todo El Tiempo: 19,028