Saltar al contenido principal

IBM ThinkPad T30 Hard Drive Replacement

Qué necesitas

  1. IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 1 de 3 IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 2 de 3 IBM ThinkPad T30 Hard Drive Replacement, Battery: paso 1, imagen 3 de 3
    • Make sure the ThinkPad is off and the power supply is unplugged.

    • Flip the ThinkPad upside down with the bottom facing you.

    • Slide the latch to the right into the unlock position.

    • While holding the latch in the unlock position, lift the battery out with your other hand.

  2. IBM ThinkPad T30 Hard Drive Replacement, Hard Drive: paso 2, imagen 1 de 1
    • Flip to the back of the Thinkpad.

    • Remove the single 11 mm screw using the Phillips #0 screwdriver.

  3. IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 1 de 3 IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 2 de 3 IBM ThinkPad T30 Hard Drive Replacement: paso 3, imagen 3 de 3
    • Flip the Thinkpad on its side to get a better view of the hard drive.

    • Push on the lower edge of the hard drive cover to detach the hard drive from the Thinkpad.

    • Once you have detached the hard drive from the Thinkpad, slide the hard drive out of the device.

  4. IBM ThinkPad T30 Hard Drive Replacement: paso 4, imagen 1 de 2 IBM ThinkPad T30 Hard Drive Replacement: paso 4, imagen 2 de 2
    • Using the plastic tool, remove the black plastic cover from the main body of the hard drive.

    • Place the plastic tool at the ends of the plastic cover to detach it from the hard drive.

    • Once the black plastic has been detached, the plastic will then slide off the body of the hard drive.

  5. IBM ThinkPad T30 Hard Drive Replacement: paso 5, imagen 1 de 2 IBM ThinkPad T30 Hard Drive Replacement: paso 5, imagen 2 de 2
    • Remove the four 2.8 mm screws from the mounting bracket using a Phillips #0 screwdriver.

    • Pull the mounting bracket off of the hard drive.

    • It may be easier to remove the mounting bracket by rotating it off of the hard drive as if it is on a hinge.

Conclusión

To reassemble your device with a new hard drive, follow these instructions in reverse order with a new hard drive replacing the old one.

11 personas más completaron esta guía.

Allie Knauer

Miembro Desde 10/05/12

90 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 3-20, Amido Fall 2012 Miembro de Cal Poly, Team 3-20, Amido Fall 2012

CPSU-AMIDO-F12S3G20

3 Miembros

16 Guías creadas

Un comentario

good description and photos..thanks :]

David - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 62

Todo El Tiempo: 19,014