Introducción

null

  1. Heat the backglass with a heat gun.
    • Heat the backglass with a heat gun.

    • Use a suction cup and a card to gently remove the back glass.

    • Don't hesitate to heath again if there is any resistance.

  2. Disconnect the fingerprint cable.
    • Disconnect the fingerprint cable.

    • You have to open the lock of the cable on the back glass.

    • Use the heat-gun to heat the fingerprint.

    • Push the fingerprint to remove it from the backglass

    • It's done.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Skyphone

Miembro Desde 05/07/13

217 Reputación

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 8

Últimos 7 Días: 37

Últimos 30 Días: 183

Todo El Tiempo: 615