Saltar al contenido principal

Qué necesitas

  1. Huawei P10 Lite Back cover Replacement, Back cover: paso 1, imagen 1 de 3 Huawei P10 Lite Back cover Replacement, Back cover: paso 1, imagen 2 de 3 Huawei P10 Lite Back cover Replacement, Back cover: paso 1, imagen 3 de 3
    • Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.

    • Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.

    • If the adhesive is hard to cut, use an iOpener to loosen it.

  2. Huawei P10 Lite Back cover Replacement: paso 2, imagen 1 de 3 Huawei P10 Lite Back cover Replacement: paso 2, imagen 2 de 3 Huawei P10 Lite Back cover Replacement: paso 2, imagen 3 de 3
    • After you cut the adhesive on every edge, twist your opening pick, to separate the rear cover from the phone.

    • Flip the rear cover over to the right side of the phone.

  3. Huawei P10 Lite Back cover Replacement: paso 3, imagen 1 de 2 Huawei P10 Lite Back cover Replacement: paso 3, imagen 2 de 2
    • Use a pair of tweezers to remove the sticker.

    • Remove the two Phillips #00 screws.

    • Remove the four 2.5 mm Phillips #00 screws.

  4. Huawei P10 Lite Back cover Replacement: paso 4, imagen 1 de 2 Huawei P10 Lite Back cover Replacement: paso 4, imagen 2 de 2
    • Use tweezers to remove the mainboard shield.

    • Use the flat end of a spudger to disconnect the finger print sensor flex cable.

    • When reassembling apply new adhesive where it is necessary.

Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Dominik Schnabelrauch

Miembro Desde 23/11/16

158,978 Reputación

649 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

141 Miembros

15,839 Guías creadas

5 comentarios

Great guide, but how do I move the fingerprint sensor to the new cover?

mela ross - Contestar

You need to warm the adhesive so it can be loose

Adwell Cellular -

What adhesive should I use? Thank you!

Calin GV - Contestar

Nice guide! Thanks! I got a little question about the coloring of the back panel. What kind of coloring is it? Is it a coating you can take off, or is it more like a layer of paint you can scrape off? I am wondering, because I want to clear the back of my Huawei P10 lite. I hope it’s possible though.

Daan - Contestar

Can you send me please back cover.

I'm from Nepal .

Md Usman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 48

Ultimos 30 días: 213

Todo El Tiempo: 36,377