Saltar al contenido principal

Reemplazo de tapa trasera del Huawei P10

Qué necesitas

  1. Reemplazo de tapa trasera del Huawei P10, Tapa trasera: paso 1, imagen 1 de 3 Reemplazo de tapa trasera del Huawei P10, Tapa trasera: paso 1, imagen 2 de 3 Reemplazo de tapa trasera del Huawei P10, Tapa trasera: paso 1, imagen 3 de 3
    • Apaga el teléfono.

    • Quita los dos tornillos Pentalobe P2 en la parte inferior.

    • Quita la bandeja de tarjeta SIM.

    Das Honor 9 hat an der Unterkante keine Schrauben.

    Wie ist das Honor 9 zu öffnen?

    Michael Tuschek - Contestar

    Vielleicht beantwortet diese Anleitung deine Frage ;)

    Tobias Isakeit -

    Hi, my P10 does not have screws, just two tiny holes. Do I push in here to unfasten? Einar, Norway

    Einar Ryvarden - Contestar

    Hi Einar Ryvarden,

    in case you bought a used or refurbished phone, someone might have forgotten to put them back in. Since you have holes at the bottom edge next to the charging port this is likely. You can try to start with step 2 and see if you can lift the phone assembly (don’t forget to remove the SIM tray first). As far as I know there is no version of the regular Huawei P10 with no screws. However you there are none in the P10 lite and in the P10 plus, maybe one of the opening procedures for those phones might help you.

    Dominik Schnabelrauch -

  2. Reemplazo de tapa trasera del Huawei P10: paso 2, imagen 1 de 3 Reemplazo de tapa trasera del Huawei P10: paso 2, imagen 2 de 3 Reemplazo de tapa trasera del Huawei P10: paso 2, imagen 3 de 3
    • Introduce una herramienta de apertura de plástico entre la pantalla y la carcasa comenzando en la parte inferior de tu teléfono.

    • Levanta con cuidado la pantalla con sus partes fuera de la carcasa.

    • Introducir la herramienta de palanca requerirá un poco de esfuerzo, ten cuidado de no deslizar la herramienta demasiado o podría dañar ligeramente la carcasa.

    • Después de hacer palanca en el extremo inferior, usa la herramienta de apertura para abrir las abrazaderas en ambos lados.

    Hi! I cannot find a way to insert the plastic opening tool. Any suggestions on how I can create a gap to start. Everything seems quit rigid.

    Also, where will I find your reply.

    vbr/lars.skoldebring@gmail.com

    lars.skoldebring - Contestar

    Hi Lars, you might want to use a suction handle to lift the display and create a small gap to insert the plastic tool. If you don’t have a suction handle you can “build” a handle with tape that you stick onto the display in a shape similar to this —> __∏__ (also you may want to edit your post and remove your email address ;) )

    Tobias Isakeit -

    Hi,

    I’m stuck at this step for about two hours… There’s nothing I can do to open the case. Tried all kinds of opening tools and a suction handle. There is no gap at all between the display and the body. How can anything be inserted into a gap that practically does not exist? Please help.

    Mark Movshovich - Contestar

    Sorry to hear that. You could try and lift the display by using a suction cup and pull to create a small gap for a tool to get in.

    Tobias Isakeit -

  3. Reemplazo de tapa trasera del Huawei P10: paso 3, imagen 1 de 2 Reemplazo de tapa trasera del Huawei P10: paso 3, imagen 2 de 2
    • No abras todavía el teléfono completamente. El cable para los botones de volumen y de modo espera está todavía conectado a la tapa trasera.

    • Abre el teléfono hacia atrás.

    • Usa un spudger para desconectar el cable flexible del botón de volumen y encendido.

    The cable is for the standby and volume buttons, not for the fingerprint sensor!

    JaL - Contestar

    Thanks JaL, of course it is.

    Tobias Isakeit -

Conclusión

Para volver a ensamblar tu dispositivo, sigue estas instrucciones en orden inverso.

6 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Dominik Schnabelrauch

Miembro Desde 11/23/16

201,099 Reputación

682 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,573 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 37

Todo El Tiempo: 7,736