How to remove Afterglow Wireless PS3 Controller Back Cover

Introducción

Removing the back cover from the Afterglow Wireless PS3 Controller requires the removal of seven screws.

Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
Lift up and remove the controller back plate.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Miembro Desde 02/17/17

789 Reputación

6 Guías creadas

USFT-HOFFMAN-S17S19G5

4 Miembros

14 Guías creadas