Repara tus cosas Comunidad Tienda

How to fix the power button on a Synology DS212J

Introducción

The power button on this device has a tenancy to break. This guide explains an easy fix.

Qué necesitas

  1. How to fix the power button on a Synology DS212J, How to fix the power button on a Synology DS212J: paso 1, imagen 1 de 1

    • Power down the Synology.

    • Since the power button no longer works you can go to the web interface [https://IP_address:5001], log in and select shutdown from the menu in the top right.

    Editar

  2. How to fix the power button on a Synology DS212J: paso 2, imagen 1 de 1

    • Remove two screws from the back.

    • Make sure to put these screws where you can find them, mine are long gone!

    Editar

    • Slide the side of the enclosure forward.

    Editar

  5. How to fix the power button on a Synology DS212J: paso 4, imagen 1 de 1

    • As you can see the plastic of the power button has broken of.

    • I considered replacing the button but fabricobbled an easier fix.

    Editar

  6. How to fix the power button on a Synology DS212J: paso 5, imagen 1 de 1

    • Remove the gray front with 3 screws for easier access.

    • Cut a bit of thin plastic to the right dimensions. (About 3 x 1 mm)

    • Superglue the thin plastic on the cross of the power button.

    Editar

    • Re-assemble and if all is well you have a working power button!

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Rogier Gerritse

Miembro Desde 01/17/22

160 Reputación

1 Guía escrita

Insignias: 3

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 15

Ultimos 30 días: 59

Todo El Tiempo: 1,152