Saltar al contenido principal

Cómo arreglar un iPhone 7 atascado/colgado de un logo

    • En este tutorial aprenderás a solucionar el problema del arranque en un iPhone 7 [bloqueado en el logo de la manzana]. En caso de problemas solo pregunta!

Conclusión

Para volver a armar tu dispositivo, sigue estas instrucciones en orden inverso.

15 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

¡ Francisco Javier Saiz Esteban nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Alex Sander

Miembro Desde 02/28/17

38,219 Reputación

202 Guías creadas

19 comentarios

Was the circuit changed? or was it done reballing?

Fabio Junior - Contestar

Thanks for your interest :) Chip replacement with reballing.

Alex Sander -

What is the name of this compononte?

Where do I meet for purchase?

Fabio Junior - Contestar

You need to get it from the another motherboard.

Alex Sander -

What exactly did you do? Just heat up that goddamned blue thing?

Alex Gray - Contestar

It is called the reflow, you need to restore the proper connection between the chip and the motherboard.

Alex Sander -

My iPhone 7 is rebooting on Apple logo. If I remove this IC it is turning on. If put it again, the same rebooting.

Alex - Contestar

Hello, which IC are you removing in order to let your phone starting? Thank you.

Florian -

Hi, so was you heat the specific components or you have replaced it with another one components from another logic board.

Valerio Raso - Contestar

No, recalling involves heating up the solder just to the point where it melts. Once the solder cools back down It makes a better connection than before, therefor it is called “recalling” and not replacement.

Robert Garner -

I have an iPhone 7. before 6 months I put on the update whereas putting on the charger and went for the work. when I return home my phone was off . then I tried to on the phone then the notification was connected to iTunes. then I connected to 3u tools and did iTunes flash that was failed because of error code 10 . can you please find the solution for this issue?

Ahamed Afridi - Contestar

Is it okay if I replace the complete logic board with a new one? What else I need to replace to make it 100% functional.

montyatan - Contestar

Hello,

my Iphone 7 storage was full, and when opening any app it close directly and any try to delete data to make some had failed so I tried to shutdown the phone, when I tried to power it up again it stuck on apple logo, so i connected the phone to itunes and tried to update it, in the middle of the process itunes gave me unknown error 14, and then the phone stuck on recovery mode.

any idea to fix the problem without losing any data? would this method fix the issue? and would some applications like dr. fone fix it without any data loss?

(battery health is 76%)

thank you in advance.

leo - Contestar

the downloaded software is IOS 13

leo -

how to set a hot air gun iphone board??

ABUTHAHIR - Contestar

what if my home button doesn’t work while my phone is stuck on apple logo?

Amarilis Garcia - Contestar

hi..what is this IC name? it is in which ciruit?

martin newton - Contestar

Thank you.. worked perfectly.

Seraphim - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 21

Ultimos 30 días: 89

Todo El Tiempo: 13,629