Repara tus cosas Comunidad Tienda

How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1)

Introducción

Your mouse may get residue, sticky material, or dust on on the body of mouse or on the sensors. Here is how to clean your mouse safely. Remember to unplug your mouse before cleaning.

Qué necesitas

  1. How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1), How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 1, imagen 1 de 1
    Herramienta utilizada en este paso:
    Microfiber Cleaning Cloths
    $3.99
    Comprar

    • Wipe the whole mouse down with a dry or slightly damp microfiber cloth.

    • This removes extra dust or grime from the mouse's exterior.

    Editar

  2. How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 2, imagen 1 de 2 How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 2, imagen 2 de 2

    • Run a toothpick around any crevices in the mouse's body.

    • The toothpick will help pry out anything that might be causing problems.

    Editar

  4. How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 3, imagen 1 de 2 How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 3, imagen 2 de 2

    • Dip your q-tip into into the alcohol.

    • Wipe the body of the mouse.

    Editar

  5. How to clean your Pictek Entry-Level Gaming Mouse (YTGEPC098AB-USAE1): paso 4, imagen 1 de 1

    • Gently brush the mouse's sensor to remove any residue.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 15

Todo El Tiempo: 996