Introducción

The grille is the part of the microphone that you speak into. Keeping the grille clean ensures that your sound quality is at its best.

Partes

No se requieren partes.

Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.
  • Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.

Agregar Comentario

Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.
  • Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.

Agregar Comentario

  • Put two drops of dish soap into a cup.

  • Add water to cup until half full.

Agregar Comentario

  • Place the grille in the solution of soap and water.

  • Let the grille soak for half an hour.

Agregar Comentario

  • Remove the grille from the cup and rinse it with cold water.

  • Allow the grille to air dry.

  • Make sure the grille and the foam inside it are completely dry before placing it back on the microphone.

Carefully remove the THIN foam filter Inside the grill. Wash this in the 2 drops of Dawn water solution.

Gently rinse in cool running water, blot dry and allow to dry. Reinstall into the grill after they both have dried.

Doug - Contestar

Linea de Meta

5 personas más completaron esta guía.

nat coll

Miembro Desde 27/09/12

366 Reputación

14 Guías creadas

Equipo

Cal Poly, Team 7-53, Forte Fall 2012 Miembro de Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 18

Últimos 30 Días: 97

Todo El Tiempo: 5,686