1. Fold fine grit sand paper over a credit card.
    • Fold fine grit sand paper over a credit card.

  2. Rub credit card with sand paper up and down vertically inside the game cartridge port.
    • Rub credit card with sand paper up and down vertically inside the game cartridge port.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Blow out game cartridge port using a can of compressed air.
    • Blow out game cartridge port using a can of compressed air.

    • Warning: Do not turn the aerosol can upside down as you spray.

  5. Rub a Q-tip dipped in rubbing alcohol along the pins of the cartridge slot to remove any remaining debris.
    • Rub a Q-tip dipped in rubbing alcohol along the pins of the cartridge slot to remove any remaining debris.

Linea de Meta

9 personas más completaron esta guía.

Equipo

Cal Poly, Team 3-29, Regan Fall 2010 Miembro de Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Miembros

5 Guías creadas

It worked! I didn't expect it too but it did! Tried it on two old Sega Genesis systems and hooked them up and I haven't had a problem.

Hilary - Contestar

All you need is a slightly worn paper fingernail file. Up & down. Back and forth 1 time. In 6 1/2 years I've never had a console come back to my store. 500 consoles & 10,000 games.

Michael - Contestar

Ver Estadísticas:

Ultimas 24 Horas: 8

Últimos 7 Días: 42

Últimos 30 Días: 236

Todo El Tiempo: 23,069