Saltar al contenido principal

Introducción

This guide will explain how to do simple maintenance on your Avanti 308YWT evaporator tray. This involves simply removing and cleaning the tray. If the evaporator tray is not cleaned it could cause the fridge to start leaking, which could eventually damage the floor.

  1. Before starting, unplug the refrigerator.
    • Before starting, unplug the refrigerator.

  2. Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.
    • Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.

  3. Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.
    • Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.

  4. The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap. The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.
    • The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.

  5. Dry and reinsert the tray.
    • Dry and reinsert the tray.

  6. Plug the refrigerator back in.
    • Plug the refrigerator back in.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Seye

Miembro Desde 11/10/14

344 Reputación

1 Guía escrita

Equipo

USF Tampa, Team 1-38, Donnelly Fall 2014 Miembro de USF Tampa, Team 1-38, Donnelly Fall 2014

USFT-DONNELLY-F14S1G38

1 Miembro

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 13

Todo El Tiempo: 1,174