1. Unplug the device from any energy sources.
    • Unplug the device from any energy sources.

    • Lift the top cover of the scanner.

    • Use a plastic prying tool to remove the plastic frame surrounding the glass.

    Agregar Comentario

  2. Carefully pull the frame away from the glass.
    • Carefully pull the frame away from the glass.

    • If it doesn't remove easily, use the iFixit Opening Tool again to pry stuck sections.

    Agregar Comentario

    • Use a T10 screwdriver to unscrew the two screws that fasten the frame to the printer hood.

    Agregar Comentario

    • Put your finger behind the panel with the power button.

    • Then, pull the piece outwards.

    Agregar Comentario

    • Unscrew the screw inside the power button panel space.

      • Then, unscrew the screw that is across the printer slider.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Pull the white circuit board outwards which is located under the small screen.

    • Unplug the small ribbon cable from the circuit board.

    • Be careful when you unplug the ribbon cable not to use too much force. Using too much force may damage or rip the cable.

    Agregar Comentario

    • Unplug the small ribbon cable from the circuit board. Be careful when you unplug the ribbon cable not to use too much force. Using too much force may damage or rip the cable.

    Agregar Comentario

    • Pull the memory card reader's circuit board out.

    • Detach the white wiring connector from the back of the circuit board.

    • You may need to use a finger nail or a Plastic Prying Tool to detach the white wiring connector from the circuit board.

    Agregar Comentario

    • Put your finger behind the small screen.

    • Then, pull it up.

    • Do not hesitate to use force to remove the TouchSmart panel.

    • Disconnect the ribbon cable from the small screen.

    Agregar Comentario

    • Pull the printer hood upward.

    Agregar Comentario

    • Ribbon Cables connect electronics to one another and flat in appearance and flexible.

    • There are many ribbon cables throughout the printer. After opening up the casing of the printer the ones that are easily accessible are the ones that need cleaning. They all require the basic process to clean.

    Agregar Comentario

    • In order to remove a ribbon cable pull the cable out of its port with a moderate amount of force. Remember the orientation of the cable if you can.

    Agregar Comentario

    • After the cable is removed use compressed air to clear dust out of the port, and a dry soft cloth to clean the end of the cable.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Tanner Cook

Miembro Desde 26/09/12

146 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 2-11, Propen Fall 2012 Miembro de Cal Poly, Team 2-11, Propen Fall 2012

CPSU-PROPEN-F12S2G11

4 Miembros

6 Guías creadas

Great guide!

no1tirelady - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 20

Todo El Tiempo: 7,062