Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV.
-
Turn the multimeter on.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Touch the red probe to the indicated positive side and the black probe to the indicated negative side.
-
Replace the battery if the voltage reads below 2.5 volts.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.