Introducción

Checking the battery is fairly easy, all you will need is a multimeter, which can be purchased at a local hardware store.

  1. Slide the battery cover up and off the phone. Slide the battery cover up and off the phone.
    • Slide the battery cover up and off the phone.

  2. Pop the battery out of its slot by lifting it up. Pop the battery out of its slot by lifting it up.
    • Pop the battery out of its slot by lifting it up.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV. Turn the multimeter on.
    • Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV.

      • Turn the multimeter on.

  5. Touch the red probe to the indicated positive side and the black probe to the indicated negative side.
    • Touch the red probe to the indicated positive side and the black probe to the indicated negative side.

      • Replace the battery if the voltage reads below 2.5 volts.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Waltman

Miembro Desde 14/01/11

111 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 14-10, Forte Winter 2011 Miembro de Cal Poly, Team 14-10, Forte Winter 2011

CPSU-FORTE-W11S14G10

5 Miembros

16 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 4,901