Introducción
To perform maintenance on the motorbike, tools are required. There is a storage compartment located on the motorbike that will hold the necessary tools. You can also add to this arsenal by adding others.
NOTE: The tool box is located on the left side of the bike (opposite the tail pipe)
-
-
Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
-
-
-
-
The tool box is located under the panel.
-
Using the key to the motorbike, unlock the tool box.
-
Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
9 personas más completaron esta guía.
Equipo
USF Tampa, Team 1-7, Donnelly Fall 2014 Miembro de USF Tampa, Team 1-7, Donnelly Fall 2014
USFT-DONNELLY-F14S1G7
1 Miembro
2 Guías creadas
