Repara tus cosas Comunidad Tienda

How to Wind a Bobbin on a Brother LX3817 Sewing Machine

Introducción

This guide will demonstrate how to wind a bobbin using a Brother LX3817 sewing machine.

Respooling a bobbin is easy with the Brother LX3817 Sewing Machine. This guide requires a plastic spool to rethread and scissors to cut excess thread between steps.

In the process of respooling, you will be working with a sewing needle attached to the machine. This needle is sharp and may cause injuries if not handled properly. Be sure to pay close attention to each step to ensure the best accuracy and least resistance is implemented.

Qué necesitas

  1. How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 1, imagen 1 de 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 1, imagen 2 de 2

    • Pull up the spool pin.

    Editar

  2. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 2, imagen 1 de 1

    • Place the spool of thread on the spool pin.

    Editar

  3. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 3, imagen 1 de 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 3, imagen 2 de 2

    • Pull the thread through the hoop.

    Editar

  4. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 4, imagen 1 de 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 4, imagen 2 de 2

    • Align the spool notch to the projection by moving it to the left.

    Editar

  5. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 5, imagen 1 de 1

    • Insert an empty bobbin spool onto the spool notch.

    Editar

  7. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 6, imagen 1 de 1

    • Sew the thread through the top hole.

    • Leave 1 inch of thread from the top hole on the bobbin.

    Editar

  8. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 7, imagen 1 de 1

    • Cut the excess thread past the 1 inch mark.

    Editar

  9. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 8, imagen 1 de 1

    • Push the bobbin winder to the right.

    Editar

  10. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 9, imagen 1 de 1

    • Loop the string around the bobbin.

    Editar

  11. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 10, imagen 1 de 3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 10, imagen 2 de 3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 10, imagen 3 de 3

    • Turn on the power button of the machine.

    • 0 means off and 1 means on.

    Editar

  12. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 11, imagen 1 de 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 11, imagen 2 de 2

    • Press down on the foot pedal.

    Editar

  13. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 12, imagen 1 de 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 12, imagen 2 de 2

    • Lift your foot off of the pedal to stop winding.

    Editar

  14. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: paso 13, imagen 1 de 1

    • Cut excess thread.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Justin Barren

Miembro Desde 02/21/23

217 Reputación

1 Guía escrita

Insignias: 3

Equipo

University of North Texas, Team 2-14, Raign Spring 2023 Miembro de University of North Texas, Team 2-14, Raign Spring 2023

UNT-RAIGN-S23S2G14

3 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 51

Todo El Tiempo: 620