Saltar al contenido principal

How to Tie a Tie: Trinity

Qué necesitas

  1. How to Tie a Tie: Trinity, Preparation: paso 1, imagen 1 de 1
    • Fold the collar of your shirt up.

  2. How to Tie a Tie: Trinity: paso 2, imagen 1 de 1
    • Wrap the tie around the back of your neck with the wide end on the left side of your body and the narrow end on the right side.

    • The narrow end of the tie will be your active end.

    • Note: The wide end of the tie should be around the height of your belly button or a little higher. It may need to adjusted for personal height.

  3. How to Tie a Tie: Trinity, Tying: paso 3, imagen 1 de 1
    • Take the active end and it cross over the wide end, so it is pointing to the left.

    • Note: be sure that the tie always lays flat so that there are no twists in the fabric.

    • Note: Be sure to keep this wrap and all subsequent wraps tight against one another.

  4. How to Tie a Tie: Trinity: paso 4, imagen 1 de 2 How to Tie a Tie: Trinity: paso 4, imagen 2 de 2
    • Wrap active end under the left side and up through the neck loop, so that it points up.

  5. How to Tie a Tie: Trinity: paso 5, imagen 1 de 2 How to Tie a Tie: Trinity: paso 5, imagen 2 de 2
    • Wrap the active end over the left side again, so that it now points down.

  6. How to Tie a Tie: Trinity: paso 6, imagen 1 de 1
    • Wrap the active end under the wide end of the tie, so that it now points towards the right.

  7. How to Tie a Tie: Trinity: paso 7, imagen 1 de 1
    • Wrap the active end over the knot, so that it now points up.

  8. How to Tie a Tie: Trinity: paso 8, imagen 1 de 1
    • Wrap the active end down through the neck loop, and pull to the left side, so that it now points left.

  9. How to Tie a Tie: Trinity: paso 9, imagen 1 de 1
    • Wrap the active end over the wide end of your tie.

    • Note: leave this wrap a little loose as it will be used in step 11.

  10. How to Tie a Tie: Trinity: paso 10, imagen 1 de 1
    • Wrap the active end under the right side and up through the neck loop, so that it points up.

  11. How to Tie a Tie: Trinity: paso 11, imagen 1 de 2 How to Tie a Tie: Trinity: paso 11, imagen 2 de 2
    • Pull the active end down through the wrap you made in step 9 (see picture 2). Then pull the active end so that it points left.

    • Note: leave this new wrap a little loose as it will be used in step 13.

  12. How to Tie a Tie: Trinity: paso 12, imagen 1 de 2 How to Tie a Tie: Trinity: paso 12, imagen 2 de 2
    • Wrap the active end under the wide tie to the right, so that the active end is pointing right.

    • Note: be sure that is tucked completely behind the wide end.

  13. How to Tie a Tie: Trinity: paso 13, imagen 1 de 3 How to Tie a Tie: Trinity: paso 13, imagen 2 de 3 How to Tie a Tie: Trinity: paso 13, imagen 3 de 3
    • Wrap active end over the knot and pull through the diagonal wrap you made in step 11 (see picture 3).

  14. How to Tie a Tie: Trinity, Finishing: paso 14, imagen 1 de 1
    • Tighten the neck knot by holding the knot and pulling on the narrow end of the tie away from you.

  15. How to Tie a Tie: Trinity: paso 15, imagen 1 de 1
    • Tighten the neck loop by pulling down on the wide end of the tie and sliding the knot up toward your neck.

  16. How to Tie a Tie: Trinity: paso 16, imagen 1 de 3 How to Tie a Tie: Trinity: paso 16, imagen 2 de 3 How to Tie a Tie: Trinity: paso 16, imagen 3 de 3
    • Tuck the rest of the narrow end into your collar and fold your collar down.

Conclusión

Congratulations! You've successful tied the Trinity knot!

2 personas más completaron esta guía.

Equipo

The Electric Warthogs Miembro de The Electric Warthogs

Community

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 21

Todo El Tiempo: 494