Repara tus cosas Comunidad Tienda

How to Shorten a Watch Band

Introducción

This guide is an easy way to shorten the band of a wristwatch by removing the watch links. Watch bands are manufactured longer so they can be adjusted to your wrist size. You should complete this guide on a table or sturdy work surface. I recommend to save any watch links you remove from the watch just in case you need them in the future.

Qué necesitas

  1. How to Shorten a Watch Band, How to Shorten a Watch Band: paso 1, imagen 1 de 1

    • Open the watch band.

    Editar

  2. How to Shorten a Watch Band: paso 2, imagen 1 de 1

    • Find the arrows inside the band and place the watch so the arrows are facing down.

    Editar

  4. How to Shorten a Watch Band: paso 3, imagen 1 de 1

    • Place a nail in the hole on the opposite side of the arrow.

    • Gently tap the nail into the hole with a small hammer.

    Editar

  5. How to Shorten a Watch Band: paso 4, imagen 1 de 1

    • Remove the pin from the hole of the watch link.

    • Remove the watch link.

    Editar

  6. How to Shorten a Watch Band: paso 5, imagen 1 de 2 How to Shorten a Watch Band: paso 5, imagen 2 de 2

    • Repeat Steps 3 and 4 until the watch band is the desired size.

    Editar

  7. How to Shorten a Watch Band: paso 6, imagen 1 de 2 How to Shorten a Watch Band: paso 6, imagen 2 de 2

    • Join the clock's bands and insert the pin in the same direction as the arrow until it is sealed.

    Editar
Linea de Meta

3 personas más completaron esta guía.

Un comentario

Never knew how easy it was until I went through this guide. Appreciate how simple you made it

Thomas Legrand - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 68

Ultimos 30 días: 368

Todo El Tiempo: 20,255