Saltar al contenido principal

How to Restore Contact Point Electrodes

Qué necesitas

  1. How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: paso 1, imagen 1 de 3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: paso 1, imagen 2 de 3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: paso 1, imagen 3 de 3
    • Remove bObi's dustbin:

    • Push down on the button found on bObi's back to release the dustbin.

  2. How to Restore Contact Point Electrodes: paso 2, imagen 1 de 3 How to Restore Contact Point Electrodes: paso 2, imagen 2 de 3 How to Restore Contact Point Electrodes: paso 2, imagen 3 de 3
    • Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.

    • Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.

  3. How to Restore Contact Point Electrodes: paso 3, imagen 1 de 2 How to Restore Contact Point Electrodes: paso 3, imagen 2 de 2
    • When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.

    • Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Chelsea

Miembro Desde 09/24/14

2,278 Reputación

31 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 290