Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a screwdriver, either a Flathead or a Phillips, remove the screws starting from the bottom of the door all the way to the top of the door to prevent the door from swinging.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Next using a screwdriver, remove the screws attaching the hinge to the door.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the new cabinet on a flat surface. Then line up the old (or new) hinge's to holes on the door.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Finally, line up the hinge’s holes with the holes from the previous cabinet door. Then screw the new door on.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.