How to Replace a Bicycle Bell Disc

Introducción

If your bicycle bell isn't ringing, it's likely because the internal arms aren't rotating well or at all. This guide demonstrates how to quickly replace the rotating discs inside the bell, and get it back into working order. This is a quick fix that does not require any tools.

Qué necesitas

Paso 1 Disc Bell

How to Replace a Bicycle Bell Disc, Disc Bell: paso 1, imagen 1 de 2

How to Replace a Bicycle Bell Disc, Disc Bell: paso 1, imagen 2 de 2

Unscrew the exterior bell housing by rotating clockwise, then remove the housing.

Editar

Paso 2

Rotate the parallel bars clockwise until they separate from the rod they're mounted on.

Editar

Paso 3

Remove the rubber discs.
Grab your new rubber discs and insert one at each end of the parallel bars.
Make sure center of the rubber discs are held in place by the pins.

Editar

Paso 4

Test and rotate the discs with your finger to see if it is the appropriate size.
If the disc does not rotate easily, change the size of your metal disc to a narrower one.

Editar