How to Replace Underside Fabric of a Chair

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

A common problem with any armchair or sofa is that the underside upholstery fabric can begin to rip, sag, or come off entirely. This guide will provide easy instructions on how to repair the fabric in 15-20 minutes and avoid the costs of replacing the chair altogether.

Qué necesitas

Paso 1 Underside Fabric

How to Replace Underside Fabric of a Chair, Underside Fabric: paso 1, imagen 1 de 1

Turn the armchair on its back.

Traducir

Paso 2

Use pliers to remove the staples from the chair frame.
If the staples are too difficult to remove, cut away the fabric with scissors.

Traducir

Paso 3

Measure out the dimensions of the perimeter of the chair frame.
Add an extra inch to each side to allow for error.

Traducir

Paso 4

Trace the dimensions onto the new fabric.
Cut along the traced lines.

Traducir

Paso 5

Fold under approximately a 1-inch allowance from the fabric’s edges.
Adjust the folded edges as needed to the correct size.

Traducir

Paso 6

Use a staple gun to staple the fabric to the chair frame starting at one corner.
If the staples do not go all the way into the chair frame, tap lightly with a hammer.

Traducir

A handy device for just this function, is a canvas stretching tool. Staple one side and use the tool to stretch tight the opposite side.

- Normally used to tension canvas over a picture frame, and would do this job with ease.

C McDonald - 31 de ene. de 2021 Contestar

Paso 7

Sit the chair upright and make sure the fabric is not visible or sagging.
If the fabric is visible, remove the staples from the closest corner and pull taut.

Traducir