Repara tus cosas Comunidad Tienda

How to Repair the Sparker on a Merlion Mini Torch

Introducción

Is your torch full of butane but not lighting? Your sparker is probably misaligned from your butane tube. Use this guide to see how to fix it!

Qué necesitas

  1. How to Repair the Sparker on a Merlion Mini Torch, How to Repair the Sparker on a Merlion Mini Torch: paso 1, imagen 1 de 3 How to Repair the Sparker on a Merlion Mini Torch, How to Repair the Sparker on a Merlion Mini Torch: paso 1, imagen 2 de 3 How to Repair the Sparker on a Merlion Mini Torch, How to Repair the Sparker on a Merlion Mini Torch: paso 1, imagen 3 de 3

    • Use the screwdriver to remove all the 1.2 mm Phillips #1 countersunk screws from the torch.

    Editar

  2. How to Repair the Sparker on a Merlion Mini Torch: paso 2, imagen 1 de 2 How to Repair the Sparker on a Merlion Mini Torch: paso 2, imagen 2 de 2

    • Open up the torch.

    • Set aside the empty side of the torch.

    Editar

  3. How to Repair the Sparker on a Merlion Mini Torch: paso 3, imagen 1 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 3, imagen 2 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 3, imagen 3 de 3

    • Pull the handle down as if you were to use the torch.

    • You will see one of the parts inside spark. This is the sparker.

    • Now gently remove the handle and set it aside.

    Editar

  5. How to Repair the Sparker on a Merlion Mini Torch: paso 4, imagen 1 de 2 How to Repair the Sparker on a Merlion Mini Torch: paso 4, imagen 2 de 2

    • Grab your pliers and GENTLY tug the sparker towards the Merlion head until it is extended about a centimeter.

    Editar

  6. How to Repair the Sparker on a Merlion Mini Torch: paso 5, imagen 1 de 2 How to Repair the Sparker on a Merlion Mini Torch: paso 5, imagen 2 de 2

    • Gently bend the sparker until it is positioned near the opening of the Merlion's mouth.

    Editar

  7. How to Repair the Sparker on a Merlion Mini Torch: paso 6, imagen 1 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 6, imagen 2 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 6, imagen 3 de 3

    • Grab the tube and gently bend it so it faces the opening of the Merlion's mouth.

    • Put the handle back on the torch.

    Editar

  8. How to Repair the Sparker on a Merlion Mini Torch: paso 7, imagen 1 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 7, imagen 2 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 7, imagen 3 de 3

    • Take the empty half of the torch and place it over the other half.

    Editar

  9. How to Repair the Sparker on a Merlion Mini Torch: paso 8, imagen 1 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 8, imagen 2 de 3 How to Repair the Sparker on a Merlion Mini Torch: paso 8, imagen 3 de 3

    • Use the screwdriver to put the screws back in the torch.

    Editar

  10. How to Repair the Sparker on a Merlion Mini Torch: paso 9, imagen 1 de 2 How to Repair the Sparker on a Merlion Mini Torch: paso 9, imagen 2 de 2

    • Hold the torch upside down and position the butane above the torch's hole.

    • Gently press down for five seconds.

    Editar
Conclusión

Congrats! Now you can use your Merlion torch again.

3 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Neel Kogali

Miembro Desde 09/29/15

200 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team 14-3, Green Fall 2015 Miembro de Cal Poly, Team 14-3, Green Fall 2015

CPSU-GREEN-F15S14G3

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 13

Todo El Tiempo: 7,543