Repara tus cosas Comunidad Tienda

Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 3 : paso 1, imagen 2 de 3 : paso 1, imagen 3 de 3

    • Pull your record out of its case, and make sure it is nice and clean.

    • If your record is dirty, you'll want to clean it before starting.

    • Place your clean record in the center of one of the glass panels.

    Traducir

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2

    • Gently set the second glass panel on top of the record.

    Traducir

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 3 : paso 3, imagen 2 de 3 : paso 3, imagen 3 de 3

    • Preheat the oven to warm, or 175 degrees Fahrenheit (or 80 Celsius).

    Traducir

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 3 : paso 4, imagen 2 de 3 : paso 4, imagen 3 de 3

    • Glass can shatter when it experiences temperature shock. Be sure that your glass is room temperature or slightly warm before putting it in the oven, so that it doesn't go from very cold to warm too quickly.

    • Slide your record, sandwiched between the two panels of glass, into the oven.

    • Stay with your record and watch it. If you smell anything funny or hear any strange noises, remove your record from the oven.

    • Warm your record in the oven for 2 or 3 minutes.

    • Leaving your record in the oven for longer may melt your record.

    Traducir

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1

    • Using oven mitts, pull the glass and record assembly out of the oven.

    • Remember that glass can shatter with temperature shock. Do not set your hot glass on a cold granite or tile countertop, or it may shatter!

    • Set the glass on a room temperature table or counter. To protect your surface, place the glass on a potholder or a towel.

    Traducir

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 3 : paso 6, imagen 2 de 3 : paso 6, imagen 3 de 3

    • Weight the glass with heavy books or another flat, heavy object.

    • Leave the record under the weight of the glass and books until it cools completely.

    • When the record is cool, remove it from the glass panels.

    Traducir
Linea de Meta

39 personas más completaron esta guía.

Autor

con 6 otros colaboradores

Brittany McCrigler

Miembro Desde 03/05/12

89,012 Reputación

131 Guías creadas

Insignias: 48

+ 45 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,767 Guías creadas

12 comentarios

just the same process to fix the graphic card of a macbook pro :-D

(Y) great!

Johan Miller - Contestar

Try this: Get two 1/2" x 12" x 12" polished marble floor tiles. Bathe (the tiles) in hot tap water until heated through. Place record in poly sleeve between the two tiles. Place weights on top - the more the better. Wait for tiles to cool. Repeat as necessary.

BooFaar - Contestar

BTW - Be sure to dry the tiles after heating.

BooFaar - Contestar

When I was a kid, I watched my Mom fix a warped record one time by putting it between the plates of glass and setting it in direct sunlight for about 10 minutes. That worked as well.

OriginalSpins - Contestar

Would sheets of stainless steel work? I don't have access to glass sheets.

Carlos Sanchez - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 31

Ultimos 7 días: 171

Ultimos 30 días: 664

Todo El Tiempo: 158,026