Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Find the shut off valve behind the toilet.

    • To close the shut off valve, most toilet valves need to be turned to the left.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2
    • Remove the lid from the tank of your toilet.

    • Find the nut inside of the tank that holds your toilet’s lever.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • Using your hand or an appropriately sized wrench, loosen the nut a little.

    • If your toilet handle is still sticking, move to the next step.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • Push the handle down slowly and watch the lever arm to make sure it is not touching anything.

    • The lever arm of your toilet handle cannot touch anything or else it might cause the handle to stick.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 2 : paso 5, imagen 2 de 2
    • If your toilet’s lever arm is touching something, bend the metal so that this does not happen.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 2 : paso 6, imagen 2 de 2
    • If your toilet’s lever arm is catching on the chain which connects it to the flapper at the bottom of the tank, then this will need to be remedied.

    • The length of the toilet chain can be adjusted by moving the hook a few links down and reattaching it to the lever.

Linea de Meta

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 11

Ultimos 30 días: 34

Todo El Tiempo: 733