Saltar al contenido principal

How to Repair a Damaged Action Figure

Qué necesitas

  1. How to Repair a Damaged Action Figure, How to Repair a Damaged Action Figure: paso 1, imagen 1 de 1
    • Clean the figurine and wash your hands before starting.

  2. How to Repair a Damaged Action Figure: paso 2, imagen 1 de 1
    • Identify the broken parts and apply a small drop of super glue on the area needing a fix.

    • CAUTION: AVOID DIRECT SKIN CONTACT WITH THE GLUE. Glue can cause skin irritation or burns.

  3. How to Repair a Damaged Action Figure: paso 3, imagen 1 de 2 How to Repair a Damaged Action Figure: paso 3, imagen 2 de 2
    • Press the two pieces together and make sure they match. Hold them together tightly for 2 minutes.

    • If any glue leaks outside when pressing, use an alcohol wipe to clean it.

  4. How to Repair a Damaged Action Figure: paso 4, imagen 1 de 1
    • Let the glue settle and dry for a minimum of 1 hour.

  5. How to Repair a Damaged Action Figure: paso 5, imagen 1 de 1
    • Use acrylic paint as necessary for patching chipped sections of the plastic.

  6. How to Repair a Damaged Action Figure: paso 6, imagen 1 de 1
    • Allow the paint to fully dry before attempting to move or adjust the figurine.

    • You can use hair dryer to speed up the drying process.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Anabela Stewart

Miembro Desde 01/31/23

142 Reputación

1 Guía escrita

Equipo

UC Davis, Team 3-8, Andersen Winter 2023 Miembro de UC Davis, Team 3-8, Andersen Winter 2023

UCD-ANDERSEN-W23S3G8

4 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 20

Ultimos 30 días: 101

Todo El Tiempo: 1,492