How to Repair a Bent Liquid Eyeliner Applicator

Introducción

If the applicator of your liquid eyeliner is bent, don’t throw it out! Learn how to restore it to working order with this easy fix. You will find all the necessary tools right in your kitchen. By repairing the eyeliner, you will prolong its lifespan and reduce the amount of plastic and chemical waste that ends up in the environment.

Qué necesitas

Paso 1 How to Repair a Bent Liquid Eyeliner Applicator

How to Repair a Bent Liquid Eyeliner Applicator, How to Repair a Bent Liquid Eyeliner Applicator: paso 1, imagen 1 de 1

Remove the cap of the eyeliner.

Editar

Paso 2

How to Repair a Bent Liquid Eyeliner Applicator: paso 2, imagen 3 de 3

Wrap the eyeliner applicator tightly with plastic wrap.
The plastic wrap should be just large enough to cover the applicator.
Smooth the bent bristles of the applicator in the same direction.
Smooth the excess plastic wrap along the body of the eyeliner.

Editar

Paso 3

Secure the plastic wrap tightly with a rubber band.
The rubber band should circle the middle of the applicator.
Check to make sure there are no holes in the plastic wrap.

Editar

Paso 4

Fill a pot with water.
The water level should be high enough to cover the tip of the eyeliner.

Editar

Paso 5

Boil the water.
Turn off the heat once the water has reached a boil.

Editar

Paso 6

Hold the eyeliner vertically above the pot of water. The applicator should be facing down.
Place the eyeliner applicator into the boiled water for 1 minute.
Do not submerge the eyeliner further than the applicator.

Editar

Paso 7

Carefully remove the rubber band and the plastic wrap.
Great Job! Your eyeliner is ready to be used again.

Editar

Conclusión

This fix is a great alternative to throwing away eyeliner that still has plenty of pigment. You'll be saving money AND the environment. What could be better?

3 personas más completaron esta guía.