Saltar al contenido principal

How to Repair a Bed Rail

Qué necesitas

  1. How to Repair a Bed Rail, How to Repair a Bed Rail: paso 1, imagen 1 de 1
    • Place an item(s) underneath the bed rail to support it. This can be bricks or books.

  2. How to Repair a Bed Rail: paso 2, imagen 1 de 1
    • Measure the length of the slat, and mark the middle.

    • This is the position where you will place the wooden plank and hammer in the nails.

  3. How to Repair a Bed Rail: paso 3, imagen 1 de 2 How to Repair a Bed Rail: paso 3, imagen 2 de 2
    • Vertically place your pre-cut wooden plank under the slat that is detached.

  4. How to Repair a Bed Rail: paso 4, imagen 1 de 1
    • Hammer the 50 mm nails down into the slat and into the wooden plank. You can use 2 or more to ensure the wooden plank is secure.

  5. How to Repair a Bed Rail: paso 5, imagen 1 de 1
    • Afterwards, run the glue along the detached bed rail.

  6. How to Repair a Bed Rail: paso 6, imagen 1 de 1
    • Reattach the bed rail and let the glue dry.

  7. How to Repair a Bed Rail: paso 7, imagen 1 de 1
    • After the glue has dried, remove your supports.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Endiyah Franklin

Miembro Desde 03/31/20

145 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 11

Ultimos 30 días: 32

Todo El Tiempo: 2,160