Saltar al contenido principal
Únete a la Comunidad de Reparación - Crear Cuenta

How to Reattach the Head of a Mailbox to the Base

Qué necesitas

    1. How to Reattach the Head of a Mailbox to the Base, How to Reattach the Head of a Mailbox to the Base: paso 1, imagen 1 de 2 How to Reattach the Head of a Mailbox to the Base, How to Reattach the Head of a Mailbox to the Base: paso 1, imagen 2 de 2
      • Inspect the head of the mailbox to see where the detachment is located.

      Pregunta a FixBot

      Agregar Comentario

    2. How to Reattach the Head of a Mailbox to the Base: paso 2, imagen 1 de 2 How to Reattach the Head of a Mailbox to the Base: paso 2, imagen 2 de 2
      • Gather all materials needed.

      • Adhesive can be included depending on the tight fit you desire.

      Pregunta a FixBot

      Agregar Comentario

    3. How to Reattach the Head of a Mailbox to the Base: paso 3, imagen 1 de 3 How to Reattach the Head of a Mailbox to the Base: paso 3, imagen 2 de 3 How to Reattach the Head of a Mailbox to the Base: paso 3, imagen 3 de 3
      • Measure out the wood plank to match the length and width of the mailbox head.

      Pregunta a FixBot

      Agregar Comentario

    4. How to Reattach the Head of a Mailbox to the Base: paso 4, imagen 1 de 3 How to Reattach the Head of a Mailbox to the Base: paso 4, imagen 2 de 3 How to Reattach the Head of a Mailbox to the Base: paso 4, imagen 3 de 3
      • Use a hammer or mallet to nail this wood plank to the bottom of mailbox head. Use at least four nails for this task.

      • Use gloves, if deemed necessary!

      Pregunta a FixBot

      Agregar Comentario

    5. How to Reattach the Head of a Mailbox to the Base: paso 5, imagen 1 de 2 How to Reattach the Head of a Mailbox to the Base: paso 5, imagen 2 de 2
      • Screw the sides down for a stronger fit using at least four screws.

      • Use gloves, if deemed necessary!

      Pregunta a FixBot

      Agregar Comentario

    6. How to Reattach the Head of a Mailbox to the Base: paso 6, imagen 1 de 1
      • Align the mailbox head back on the post.

      Pregunta a FixBot

      Agregar Comentario

    7. How to Reattach the Head of a Mailbox to the Base: paso 7, imagen 1 de 2 How to Reattach the Head of a Mailbox to the Base: paso 7, imagen 2 de 2
      • Hammer down the head to the post of the mailbox with at least three more nails.

      • Add adhesive if necessary for a sturdier attachment.

      • Since your hands are inside the mailbox, it may be best to use gloves for this task.

      Pregunta a FixBot

      Agregar Comentario

Linea de Meta

Cancelar: No complete esta guía.

Terrell Cobbins

Miembro Desde 03/21/23

145 Reputación

1 Guía escrita

0Guía Comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 94

Todo El Tiempo: 1,644