Introducción

There are a number of ways that you can reduce the occurrence of wheel bite with your skateboard. All of these ways can be used separately or together depending on your preference and need. This guide will show you how to perform the three most fundamental methods in order of how they would be installed together. Keep in mind you can pick and choose any of these methods at your discretion.

Herramientas

Partes

  1. When it comes to preventing wheel bite you may want to add a riser.  This will occur during the truck installation process.  If you have not started this process, get to step 3 in the Truck Installation guide and return here for your next step.
    • When it comes to preventing wheel bite you may want to add a riser. This will occur during the truck installation process. If you have not started this process, get to step 3 in the Truck Installation guide and return here for your next step.

    • Now that you are just about ready to install your trucks, simply place the riser onto the hardware before the trucks. Return to the Truck Installation guide to finish installing the trucks.

    Agregar Comentario

  2. Once you have installed your trucks you can tighten your kingpin nut using a 9/16" wrench to prevent wheel bite.
    • Once you have installed your trucks you can tighten your kingpin nut using a 9/16" wrench to prevent wheel bite.

    • Tightening your kingpin will limit your turning ability so that the wheels won't catch on the deck.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Another way to further prevent wheel bite is to replace the kingpin bushings with a harder ones. You will first want to remove the kingpin nut completely using your 9/16" wrench.

    Agregar Comentario

    • Remove the kingpin bushings from the kingpin.

    Agregar Comentario

    • Slide on your new harder kingpin bushings.

    Agregar Comentario

    • Place the washer back over your new kingpin bushing and thread on the kingpin nut to your preferred tightness. This harder bushing will make it harder to turn, preventing the wheels from hitting the deck on hard turns.

    Agregar Comentario

Conclusión

To remove your risers, simply remove your trucks following the reverse directions of the Truck Installation guide. Follow steps of this guide in reverse to replace your old kingpin bushing.

3 personas más completaron esta guía.

Jared Stine

Miembro Desde 05/10/12

642 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 6-32, Regan Fall 2012 Miembro de Cal Poly, Team 6-32, Regan Fall 2012

CPSU-REGAN-F12S6G32

5 Miembros

5 Guías creadas

That's some mondo wheel bite on that board! :-P

Wesley Applequist - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 24

Últimos 30 Días: 89

Todo El Tiempo: 13,242