Repara tus cosas Comunidad Tienda

How to Position a Vernier Caliper

Introducción

These instructions will cover the techniques for measuring external & internal features, as well as heights and depths.

Qué necesitas

  1. How to Position a Vernier Caliper, Good Practice: paso 1, imagen 1 de 2 How to Position a Vernier Caliper, Good Practice: paso 1, imagen 2 de 2

    • Use the metal wheel contacting the measured surfaces.

    • This will allow for a more repeatable measurement.

    • Extend the calibration life of the device. Preventing damage to the measuring surfaces or measured part.

    • Make use of the locking mechanism.

    • Occasionally the device has to be positioned in a way that cannot be read.

    • Always prioritize comfort. If there is a change the jaws can move when attempting to read. Lock the device. Move it to you.

    • Ensure the part is secure, use flat surfaces, try to use the vernier comfortably with both hands.

    Editar

  2. How to Position a Vernier Caliper, External Feature: paso 2, imagen 1 de 3 How to Position a Vernier Caliper, External Feature: paso 2, imagen 2 de 3 How to Position a Vernier Caliper, External Feature: paso 2, imagen 3 de 3

    • External features are measured as shown.

    • These sections of the jaws have a knife edge,

    • Used to measure smaller features with low clearances.

    • These sections have a flat edge.

    • Used to measure larger features with perpendicular surfaces.

    Editar

  4. How to Position a Vernier Caliper, Internal Feature: paso 3, imagen 1 de 1

    • Internal features are measured as shown.

    Editar

  5. How to Position a Vernier Caliper, Height: paso 4, imagen 1 de 3 How to Position a Vernier Caliper, Height: paso 4, imagen 2 de 3 How to Position a Vernier Caliper, Height: paso 4, imagen 3 de 3

    • Heights of steps are measured as shown.

    • Butt the head of the caliper against one surface.

    • Butt the head of the slider against the other surface.

    Editar

  6. How to Position a Vernier Caliper, Depth: paso 5, imagen 1 de 2 How to Position a Vernier Caliper, Depth: paso 5, imagen 2 de 2

    • Depth of holes are measured as shown.

    • Position the blade to the center of the hole.

    • Hold the end of the caliper flush the surface of the hole.

    • Extend the slider until the blade bottoms out the hole.

    Editar
Conclusión

Happy Measuring

5 personas más completaron esta guía.

Autor

con 1 otro colaborador

James Schreiber

Miembro Desde 07/01/17

254 Reputación

1 Guía escrita

Insignias: 6

+ 3 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 18

Todo El Tiempo: 1,519