Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wipe all broken edges with rubbing alcohol using a paper towel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Apply the epoxy along the edges of the base piece of china and first chipped piece of china using the toothpick.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Attach the first detached piece to the base carefully by hand.
-
Adjust as needed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Apply epoxy on the next detached piece and the already mended piece
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Attach the piece to the china.
-
Adjust as needed
-
Repeat the process of applying epoxy and attaching the chips until all broken pieces are successfully in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place mended china in a container of stabilizing sand or gravel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Shave off as much excess epoxy as possible using the razor.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use coarse sandpaper to further reduce the excess epoxy.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use fine sandpaper to smooth out remaining inconsistencies.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.