Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Partes

  1. Shutdown your phone Get out the rear case of your phone Unscrew all screws identified in red on the photo
    • Shutdown your phone

    • Get out the rear case of your phone

    • Unscrew all screws identified in red on the photo

    • Remove all plastic pieces using your nails or a plastic tool

  2. Unstick careflly the 3 metal stickers (connectors) identified in white on the photo with a flat screwdriver. Be careful these stickers are breakable.
    • Unstick careflly the 3 metal stickers (connectors) identified in white on the photo with a flat screwdriver. Be careful these stickers are breakable.

    • Cut some thick papers or cardboard to the size of each sticker.

    • Stick under each sticker a cut piece of paper / cardboard in order to make a thickness

    • Put the stickers back to their initial location (they will not stick again but it not important).

    • Reassemble the phone by following the previous steps backwards

Conclusión

To mount again your phone, follow the previous steps in the inversed order.

Una persona más ha completado esta guía.

Un agradecimiento especial a estos traductores:

100%

¡ draxx nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

draxx

Miembro Desde 08/02/19

175 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 33

Todo El Tiempo: 974