Saltar al contenido principal

Introducción

Follow this guide to install a 2.5” SSD into a silicone enclosure sold by iFixit.

  1. Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure: The wide power SATA port
    • Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure:

    • The wide power SATA port

    • The narrower data SATA port

  2. Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure's. Slide the drive into the enclosure's opening. Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.
    • Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure's.

    • Slide the drive into the enclosure's opening.

    • Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.

  3. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.
    • Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.

Conclusión

Your drive is ready to be used!

Una persona más ha completado esta guía.

Arthur Shi

Miembro Desde 03/01/18

161,189 Reputación

412 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

137 Miembros

16,049 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 405