Introducción
Today wood is expensive, so replacing dented or damaged wood can get extremely costly. Wooden counters and tabletops can be dented by everyday wear and tear. This step-by-step guide will teach you how to properly get dents out of wooden surfaces using just a household flat iron and a wet hand towel. Be sure to know how your own household flat iron operates to avoid injury.
Qué necesitas
-
-
-
Fill a medium-sized bowl with room-temperature water.
-
Dip a hand towel into the bowl of water.
-
Wring the hand towel out a bit until it is damp rather than dripping wet.
Pregunta a FixBot
-
-
-
In the wood surface, find the dent you wish to remove.
-
Place the damp hand towel over the dented area as flat as possible.
-
-
-
-
Firmly press the flat iron down on the damp hand towel.
-
While pressing down, move the iron in circular or back and forth motions.
-
-
-
Continue the circular or back and forth motions until the hand towel is dry.
-
-
-
Repeat steps 1-5 until the dent is gone.
-
Turn off the flat iron after finishing.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
UC Davis, Team 1-12, Morris Winter 2023 Miembro de UC Davis, Team 1-12, Morris Winter 2023
UCD-MORRIS-W23S1G12
Miembros de 3
10 Guías creadas
