Saltar al contenido principal

How to Fix a Wobbly Hydraulic Barber Chair

Qué necesitas

  1. How to Fix a Wobbly Hydraulic Barber Chair, How to Fix a Wobbly Hydraulic Barber Chair: paso 1, imagen 1 de 2 How to Fix a Wobbly Hydraulic Barber Chair, How to Fix a Wobbly Hydraulic Barber Chair: paso 1, imagen 2 de 2
    • The issue with the barber chair is located at the base, where the screws have come loose.

  2. How to Fix a Wobbly Hydraulic Barber Chair: paso 2, imagen 1 de 2 How to Fix a Wobbly Hydraulic Barber Chair: paso 2, imagen 2 de 2
    • Use your foot to repeatedly pump the hydraulic height-adjustment pedal under the chair until the chair reaches max height.

    • While holding the pedal down with your foot, grab both arm rests and pull the chair upwards.

  3. How to Fix a Wobbly Hydraulic Barber Chair: paso 3, imagen 1 de 1
    • Lift the base-ring off the base to reveal the holes for the screws.

  4. How to Fix a Wobbly Hydraulic Barber Chair: paso 4, imagen 1 de 1
    • Place a screw with a washer attached into a hole and tighten it with a 7/32" hex bit.

    • Repeat this process for the other 5 screws and washers.

  5. How to Fix a Wobbly Hydraulic Barber Chair: paso 5, imagen 1 de 1
    • Align the bottom of the seat with the top of the pole, and gently put it back into position.

  6. How to Fix a Wobbly Hydraulic Barber Chair: paso 6, imagen 1 de 1
    • Make sure the seat is properly fitted onto the pole by gently pushing down on the seat.

    • Check the stability of the pole by gently shaking the chair.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Gaurav Tiwari

Miembro Desde 01/21/21

133 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 12

Ultimos 30 días: 88

Todo El Tiempo: 3,480