Repara tus cosas Comunidad Tienda

How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828

Introducción

Have a loose turret on your Sony Cyber-shot DSC-F828 camera? This guide will show you how to successfully repair that turret so your photo-taking skills can return to optimum performance. A shock-free mat or a grounding bracelet is also recommended when fixing this particular device.

Be sure to leave the lens cap on to avoid scratching the lens.

Qué necesitas

  1. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828, How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 1, imagen 1 de 2 How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828, How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 1, imagen 2 de 2

    • Slide the button back to open the battery cover.

    Traducir

  2. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 2, imagen 1 de 2 How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 2, imagen 2 de 2

    • Pull back on the tab to release the battery.

    • Pull the battery out, then close the lid.

    Traducir

  3. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 3, imagen 1 de 1

    • Remove the screw on the back of the turret with a JIS #00 screwdriver.

    Traducir

  5. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 4, imagen 1 de 2 How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 4, imagen 2 de 2

    • Remove two screws from each side of the camera (four in total) using a JIS #00 screwdriver.

    Traducir

  6. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 5, imagen 1 de 1

    • Remove the screw on the bottom of the turret using a JIS #00 screwdriver.

    Traducir

  7. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 6, imagen 1 de 1

    • Carefully pull the face plate off and lay it down.

    • There is a cable attached to the plate that should not be removed.

    Traducir

  8. How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 7, imagen 1 de 2 How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828: paso 7, imagen 2 de 2

    • Tighten the two screws using a JIS #00 screwdriver.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Un comentario

Thanks, I just used this to tighten the pivot on an F828 I got on eBay. Super easy.

photoman12001 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 38

Todo El Tiempo: 1,079