Saltar al contenido principal

Introducción

This guide will show you how to repair a correcting tape within a few steps and make a full used of it.

Partes

No se especificaron partes.

  1. From the button, open the case of the correcting tape. From the button, open the case of the correcting tape.
    • From the button, open the case of the correcting tape.

  2. Cut from the middle of the extra correcting tape and remove those used parts. Cut off those used parts from the place near the small gear.
    • Cut from the middle of the extra correcting tape and remove those used parts.

    • Cut off those used parts from the place near the small gear.

  3. Cut a small piece of the scotch tape.
    • Cut a small piece of the scotch tape.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Connect the remaining correction tape to the small gear by using a small piece of scotch tape.
    • Connect the remaining correction tape to the small gear by using a small piece of scotch tape.

  6. After the connection is made, wrap the used tape tightly around the gear.
    • After the connection is made, wrap the used tape tightly around the gear.

    • Put all the parts back in place.

  7. Close the case of the correcting tape and snap back to place.
    • Close the case of the correcting tape and snap back to place.

  8. You're done!
    • You're done!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Yi Luo

Miembro Desde 26/10/18

145 Reputación

1 Guía escrita

Equipo

UC Davis, Team S2-G5, Bender Fall 2018 Miembro de UC Davis, Team S2-G5, Bender Fall 2018

UCD-BENDER-F18S2G5

2 Miembros

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 64

Últimos 30 Días: 309

Todo El Tiempo: 887