How to Fix Plastic Chair Cracks

Introducción

This guide will show you how to repair a crack in a generic plastic chair. The cracks this guide specifically addresses include partial cracks on the chair body/legs and full cracks on the chair spindle.

This guide focuses on how to repair a crack on the chair spindle. It involves making a new seal for the crack using super glue and baking soda and sanding it down to bring the broken area back to its original look.

Warning: Work in an area with good ventilation. Isopropyl alcohol is flammable. Additionally, wear protective clothing to avoid getting super glue on your clothes or skin.

Qué necesitas

Paso 1 How to Fix Plastic Chair Cracks

How to Fix Plastic Chair Cracks, How to Fix Plastic Chair Cracks: paso 1, imagen 1 de 2

How to Fix Plastic Chair Cracks, How to Fix Plastic Chair Cracks: paso 1, imagen 2 de 2

Lay the broken chair such that the crack is parallel to the floor.

Editar

Paso 2

Wear gloves to minimize chemical contact on skin.
Dampen a rag with isopropyl alcohol.

Editar

Paso 3

Clean the surface of the crack with the dampened rag to remove all dust and debris.
Repeat on all sides of the crack (edges and backside).

Editar

Paso 4

How to Fix Plastic Chair Cracks: paso 4, imagen 3 de 3

Apply glue between the crack.
Then apply glue across the surface of the crack.

Editar

Paso 5

Hold the two glued pieces together for 30 seconds to allow the glue to bind to the chair.
Do not let the glue dry completely. The wet glue will need to bind with baking soda in the next step.

Editar

Paso 6

How to Fix Plastic Chair Cracks: paso 6, imagen 3 de 3

Pour baking soda over the crack until the glue is completely covered under a layer of baking soda.

Editar

Paso 7

Use your finger to distribute the baking soda in order to cover all parts of the crack.

Editar

Paso 8

How to Fix Plastic Chair Cracks: paso 8, imagen 3 de 3

Allow the baking soda to seal onto the super glue over the crack and wait for the mixture to dry.
After ten minutes, brush away some of the un-glued baking soda to check if the glue is solid.

Editar

Paso 9

Flip the chair over.
Repeat the procedure on the backside of the crack starting from step 4 and ending with step 8.
Avoid reapplying glue in between crack, since it has already been sealed.

Editar

Paso 10

Remove excess baking soda from both the front and back side of the crack.
Use water or isopropyl alcohol to remove fine grains around the repair site.

Editar

Paso 11

Sand off any excess layers of glue on both the front and backside of the chair using coarse sandpaper.
This step is optional and simply helps to return the chair to its original look.
It may take a while to rid the chair of all texture.